The connection to the alarm is a normally closed, volt-free connection system and our control panel is 24 volts. The fire alarm system will need to be able to work with our low voltage control panels. If the fire alarm panel or detector is mains powered a relay will need to be put in place to ensure the fire curtain control panel does not blow a fuse. The only thing we don’t do during the installation is to connect to an already existing fire alarm system. The electrician or fire alarm technician will connect the alarm to the panel and our installers will advise on site how to do this. If the smoke or heat detector is provided by Smoke & Fire Curtains Ltd then our installers will made the connection to the alarm.
What is the connection to the alarm?localhost