Corner Guard

Corner Guard2020-08-12T20:10:24+11:00

Corner Guard

Protect corners from damage with minimum design interruption using Tape-On Corner Guards.

If corner guards are going over vinyl wall covering, we recommend the No Tape option with Heavy Duty adhesive when installing.

  • 25mm, 35mm, 50mm and 75mm
  • .080″ (2mm) thick rigid vinyl
  • Standard Heights: 4′ (1.22m), 8′ (2.44m), 9′(2.74m), 12′ (3.66m)
  • Also available in Woodlands Faux Wood Patterns
  • Provide quick installation with factory applied adhesive tape
  • Complement interiors with a wide variety of colors

WT11

The original “shock absorbing” corner guard prevents unsightly damaged corners. This model features snap on covers with a 1/4″ (6.4mm) radius and 3″ (75mm) legs. Specify correct model for continuous regrind retainer, continuous aluminum retainer and odd degree corner. Optional horizontal accent reveal can be installed at the joint between the end cap and cover; available in Black only.

WT12

This corner guard features a snap on cover with a 1/4″ (6.4mm) radius and 2″ (50mm) legs. For end wall conditions combine two of these corner guards with a sheet backer cut for specified wall dimension. Optional horizontal accent reveal can be installed at the joint between the end cap and cover.

WT13

This corner guard features a snap on cover 35mm x 35mm. For end wall conditions combine two of these corner guards with a sheet backer cut for specified wall dimension. Optional horizontal accent reveal can be installed at the joint between the end cap and cover.

WT14

These lower cost corner guards are made from and do not utilize a retainer. They are available in several leg lengths and install with factory-applied self-adhesive tape and the size is 25mm x 25mm

Need Help? Chat with us